Reference
Damascus steel glossary.
The terms you’ll see on spec sheets and in our guides, explained in one place.
- 15N20
- A nickel-bearing carbon steel (about 2% nickel) that stays bright after etching. The usual partner to 1084 or 1095 in carbon Damascus.
- 1084 / 1095
- Simple high-carbon steels. 1084 is forgiving to heat-treat; 1095 has more carbon and a slightly keener edge. Both etch dark.
- Annealed
- Softened by slow cooling so steel can be drilled, ground or forged. Blanks are often supplied annealed.
- Billet
- A bar of forge-welded, layered steel before it is made into a blade.
- Bolster
- The thick metal junction between blade and handle; adds balance and protects the hand.
- Cladding
- Outer layers forged around a harder core steel. Most Damascus kitchen knives are clad.
- Core steel
- The hard steel in the centre of a clad blade that forms the cutting edge (e.g. VG10).
- Etching
- Treating the finished blade with mild acid (often ferric chloride) so different steels show contrast.
- Flipper
- A folding knife opened manually by pressing a tab on the blade; usually runs on bearings.
- Forge welding
- Joining steels by heating them to welding temperature and hammering or pressing them together.
- Full tang
- The blade steel runs the full length and width of the handle — the strongest construction.
- Gyuto
- The Japanese chef knife; the Damascus kitchen knife most retailers start with.
- HRC (Rockwell C)
- The hardness scale for knife steel. Kitchen knives 58–61, pocket knives 57–60, choppers 54–57, swords 50–55.
- Layer count
- How many layers a billet contains (e.g. 67, 192, 300). More layers means a finer pattern, not necessarily a better knife.
- Liner lock
- A folding-knife lock where a sprung liner moves behind the blade tang to lock it open.
- Mosaic Damascus
- Billets built from pre-arranged pieces so a picture-like tile repeats; very labour-intensive.
- Patina
- A stable grey-blue oxide that forms on carbon steel with use; protective, unlike red rust.
- Pattern-welded steel
- The technical name for modern Damascus: different steels forge-welded and manipulated to create a pattern.
- Saya
- A wooden sheath for Japanese kitchen knives and swords.
- Spine
- The unsharpened back edge of a blade — the first place to check for real Damascus layers.
- Stainless Damascus
- Damascus made from stainless steels; corrosion-resistant with softer contrast.
- Tang
- The part of the blade that extends into the handle.
- VG10
- A Japanese stainless steel widely used as a core in Damascus kitchen knives; 59–61 HRC.
- Wootz
- The historic crucible steel from South India used for original Damascus blades; different from pattern welding.
Trade enquiries
Build your Damascus range.
Tell us what you sell and where. You’ll get spec sheets, unit pricing, minimums and lead times — usually within one business day.